How do you handle Florida hurricane wind load engineering?

We calculate site-specific wind pressures according to ASCE 7 and the Florida Building Code, specifying approved racking and attachments for 140 to 180+ MPH hurricane wind zones.

Do Florida solar plans require a Florida licensed PE stamp?

Yes, Florida building departments require structural and electrical plans to be signed and sealed by a licensed Florida Professional Engineer (PE). We provide full Florida PE stamping.

Which Florida utilities do you support?

We support FPL, Duke Energy Florida, TECO, OUC, and JEA.

How fast do you deliver residential solar permit plan sets?

Our typical turnaround time for residential solar permit design plan sets is 24 to 48 hours, with same-day expedited options available for solar contractors.

Can you design solar layouts for tile, flat, and metal roofs?

Yes, we specialize in residential drafting for all roof types including Spanish tile, standing seam metal, corrugated roofs, composition shingle, and flat roofs.

Do you design battery storage and backup systems (Tesla Powerwall, Enphase, SolarEdge)?

Yes, we create comprehensive residential solar + battery storage plan sets including backup load center wiring, ESS disconnects, and utility compliance.

Are your residential plans guaranteed to pass local city AHJ permits?

Yes, our designs follow national NEC electrical codes and local AHJ building guidelines. In the rare event of AHJ plan check comments, we provide rapid revisions.

Residential Design, City Permit, Engineering & PTO / NEM

Explore our tailored service options below and choose the ideal plan for your requirements.

Permit Design

Up to 12 kW

$125.00

Ideal for standard residential rooftop solar installations.

First 2 correction free
$25 / correction after
24-48 hr delivery

Permit Design

12 to 25 kW

$200.00

Best suited for large residential or multi-array setups.

First 2 correction free
$25 / correction after
24-48 hr delivery

All-In-One-Bundle

Upto 9.99 kW

$950.00

Popular because it covers design, city permit, PTO, and if required city structural stamping in one bundle.

Design within 24 hrs
Unlimited city correction only

Permit Design

Over 25 kW

$300.00

Comprehensive packages for high-capacity residential systems.

First 2 correction free
$25 / correction after
24-48 hr delivery

All-In-One-Bundle

Over 10 kW

$1250.00

Popular because it covers design, city permit, PTO, and if required city structural stamping in one bundle.

Design within 24 hrs
Unlimited city correction only

Engineering Stamps Category

Structural Stamp

Up to 15 kW

$175.00

Residential structural engineering stamp.

Restamp fee: $25
Fast engineering delivery

Structural Stamp

Over 15 kW

$300.00

Large residential structural engineering stamp.

Restamp fee: $25
Fast engineering delivery

Electrical Stamp

Up to 15 kW

$175.00

Residential electrical engineering stamp.

Restamp fee: $25
Fast engineering delivery

Electrical Stamp

Over 15 kW

$300.00

Large residential electrical engineering stamp.

Restamp fee: $25
Fast engineering delivery

City Permits & Interconnection Category

City Permit

Up to 10 kW

$250.00

City permit application.

City fees not included

City Permit

Over 10 kW

$350.00

City permit application.

City fees not included

PTO / NEM

Up to 10 kW

$250.00

PTO / NEM interconnection application.

NEM fees not included

PTO / NEM

Over 10 kW

$350.00

PTO / NEM interconnection application.

NEM fees not included

FLORIDA SOLAR ENGINEERING

Florida Solar Permit Design & Wind Engineering Sets

Florida solar permitting requires specialized engineering due to the Florida Building Code (FBC), high-velocity hurricane zones (HVHZ), and stringent 150â€“180+ MPH wind load calculations.

Your Solar Permit specializes in Florida AHJ-compliant residential and commercial solar permit plan sets. We design and stamp plan sets for FPL (Florida Power & Light), Duke Energy Florida, Tampa Electric (TECO), and OUC, ensuring seamless approvals in Miami-Dade, Broward, Orlando, Tampa, and throughout the state.

160+ MPH Hurricane Wind Load Calcs

FPL, Duke Energy, TECO Approved

Licensed Florida PE Stamps

24-48h Expedited Turnaround

Florida Hurricane Rated Solar Permit Design

FLORIDA FAQS

Florida Solar Permit FAQs

Answers regarding Florida Building Code, HVHZ hurricane wind loads, and utility interconnection.

We calculate site-specific wind pressures according to ASCE 7-16/7-22 and the latest Florida Building Code (FBC), specifying approved racking mounts and attachment spacings for wind speeds from 140 MPH up to 180+ MPH in HVHZ zones (Miami-Dade / Broward).

Yes, virtually all Florida building departments require structural attachment engineering and electrical plans to be digitally signed and sealed by a licensed Florida Professional Engineer (PE). We provide full Florida PE stamping services.

We engineer plan sets compliant with all Florida electric utilities, including Florida Power & Light (FPL), Duke Energy Florida, Tampa Electric Company (TECO), Orlando Utilities Commission (OUC), and JEA (Jacksonville).

Your Solar Permit

Fast, accurate, AHJ-compliant solar permit design and licensed PE stamping across all 50 US states.

Po Box 880015, San Diego, CA 92168

[email protected]

5.0 / 5.0 Rated by US Installers

Permit Services

Hubs & Guides

Get Started

Need permit-ready drawings in 24-48 hours? Submit your project specs online.

Request Plan Set

100% AHJ Approval Guarantee

About Us Contact Samples