Site and roof layout
Array location, roof planes, major obstructions, equipment positions, and the route that connects the system to the building.
A San Diego solar design should respond to the specific building, from a small pitched roof to a large commercial facility.
We coordinate roof access, mounting, electrical connection, and battery operation when included. The city and utility path is confirmed from the address and project scope.
Permit and interconnection steps can change with the address, the scope of work, and the utility serving the property. We confirm those details during scoping instead of treating every project in San Diego as the same installation.
The final sheet list depends on the project. These are the pieces we commonly coordinate for a residential or commercial solar permit package.
Array location, roof planes, major obstructions, equipment positions, and the route that connects the system to the building.
Modules, inverter, overcurrent devices, disconnects, conductors, and the proposed point of connection shown together.
Attachment or foundation approach and supporting structural information, with professional engineer review when the scope calls for it.
Battery location, operating mode, transfer equipment, and backed-up loads when storage is part of the project.
Equipment schedule and manufacturer data aligned with the models named on the roof and electrical sheets.
Sheets organized so the installer, owner, utility, and permitting authority can follow the same proposed system.
Send the property address, roof or site photos, utility bill, service label, and the proposed solar and battery equipment if selected.
We identify missing information, confirm the project scope, and coordinate roof, electrical, structural, and storage choices.
We assemble the applicable drawings and supporting details for the project team to review before submission.
We prefer to confirm the property details before making promises about a permit route or utility requirement.
Start with the project address, roof or site photos, main panel label, utility bill, and the equipment you plan to use. For this project, address, roof photos, service photos, and equipment list will be especially helpful.
Yes, those can be included in the design scope. We need to know the battery model, desired backed-up loads, and whether the service equipment is staying or changing before the electrical diagram is finalized.
That depends on the exact address and project type. We check the applicable local authority and serving utility during scoping; we do not assume a citywide answer fits every property.
For California-wide reference, see the California Energy Commission equipment lists and its residential permitting program. These resources do not replace address-specific local review.
See another city page or return to the complete California service area directory.
Send the address, photos, and equipment details. We will identify the drawing and engineering work needed for your site.
Explore related resources
Move from local requirements to a coordinated, permit-ready solar design package.
To keep planning moving, see California permit guidance, compare Avoid solar permit redlines, and use Residential solar design. Related specialist resources include Electrical and solar installation by DAE Electric for electrical and solar installation and Solar permitting support from Your Solar Permit for solar permitting.